Side Winder

Low Profile Electric Fan Kit

Our Newest Product, The Sidewinder Fan Kit is designed to fit where other fans can't. It's low profile design and high CFM output is sure to keep your vehicle running cool.

• Over 2200 CFM
• Only 1 5/8" depth at center of fan
• Easy to install, takes up minimum space
• Pull only
• Quiet operation

Part #SW

Down Flows / Shrouds
Most down flows use one large fan 3 3/8" thick x 16" in diameter.

IMPORTANT: Allow an additional 1/8" when using our mounting brackets. Shrouds cannot be used on a pusher fan. Adding a shroud puts a fan 1 1/8" closer to the water pump. If the core is larger then 20" x 24" then two electric fans work best. Fans come in 2 1/2" or 3 3/8" thickness. On a 16" fan, the top of the fan shroud to the bottom of the fan motor measures 11". Below the fan motor you will need approximately 2" between teh water pump and core for mounting the fan. Down flows with core sizes wider then 20" or taller then 24" work better using a custom shroud.